ANTI-SEIZE COPPER PASTE

LUBRICATING GREASE FOR VERY HIGH TEMPERATURES

ASSEMBLY, INSTALLATION, REMOVAL

ELECTRO-CONDUCTIVE COPPER GREASE

ANTI-CORROSION, RESISTS ACIDIC ENVIRONMENTS

COMPLIES WITH SPECIFICATIONS

MIL A 907 ED - STM 7411 A

SECLF 216 - MIL A 907 E 80

 

 

  

DESCRIPTION

Grease for the assembly of static assemblies subject to high temperatures and aggressive environments. Enables disassembly. Dynamic lubrication of assemblies while operational, subject to oscillations or shearing effects. Effective both in static use and in the presence of vibrations.

Can be used and is effective when applied in thin coats. Product guaranteed free of metalloids and nitrites.

Lubricant and anti-corrosion agent for use at high temperatures. Do not use on surface contacts that may exhibit catalytic coupling.

Do not use on bearings or slow-moving rollers without frequently applying lubricant.

 

FIELD OF USE

Grease for drill stems, connectors, tools, down-the-hole hammer threads, stainless steel rods.

Low, medium and high-voltage electrical contacts.

Pantographs. Bogie centre plates.

Screwed assemblies at very high temperatures.

Cable glands. Mechanical seals. Impregnation of sealing braids.

Toric seals.

Sliding bearings on hot roll benders.

Turbines. Combustion engines. Compressors. Gas generators.

Foundry ejectors. Curing mould seals.

Furnace hinges. Ingot clamps.

Lubrication of live cables.

Point welding machine jaws.

 

INSTRUCTIONS FOR USE
Shake the aerosol can vertically for a few moments after the ball in the can becomes detached. First degrease the mechanism to be lubricated as needed using Neutralène® V200 aerosol. Spray at a distance of 15 to 25 cm depending on the size of the mechanism.

 

Download the data sheet

 

TYPICAL PHYSICO-CHEMICAL PROPERTIES

PHYSICAL PROPERTIES OF THE GREASE
PROPERTIES	STANDARD OR METHOD	VALUE	UNIT
Appearance	Visual	Paste	-
Colour	Visual	Copper	-
Apparent density at 25°C (pycnometer)	NF T 30 020	995	kg/m³
NLGI Class	NLGI National Lubricating Grease Institute	2	Classification
Thickener	-	Inorganic	-
Solid lubricant content	-	Lamellar copper	15%
Penetrability at 25°C                          Non-worked                          Worked, 60 strokes            Worked, 1,000 strokes             Worked, 10,000 strokes         Worked, 100,000 strokes	NF ISO 2137 / ASTM 2176	265-295 265-295 265-295 275-305 275-305	1/10° mm 1/10° mm 1/10° mm 1/10° mm 1/10° mm
Dropping point Dropping point if greater than 360°C	NF ISO 2176 / ASTM D 566 ASTM D 2265	>250 -	°C
Impurities > 25 µm > 75 µm > 125 µm	FMTS 791 3005	nm nm nm	nb/ml  nb/ml nb/ml
PHYSICO-CHEMICAL PROPERTIES OF THE BASE OIL
PROPERTIES	STANDARD OR METHOD	VALUE	UNIT
Characteristics of the base oil	-	Polymer	-
Kinematic viscosity at 40°C           Kinematic viscosity at 100°C	NF EN ISO 3104	140 100	mm/s־¹ mm/s־¹
Acid value (AV)	NF ISO 6618	<0.5	mg KOH/l
PERFORMANCE PROPERTIES
PROPERTIES	STANDARD OR METHOD	VALUE	UNIT
Oil separation, 7 days at 40°C (bleeding)	NF T 60 191	0	% of mass
Oil separation, 24 hours at 41 kPa (bleeding under pressure)	ASTM D 1742	<0.8	% of mass
Sulphated ashes	NF T 60 144	<1.0	% of mass
Copper strip corrosion	ASTM D 4048	1b	Rating
Hoffman oxidation	ASTM D 942	<15	psi
Loss by evaporation, 22 hours at 121°C	ASTM D 972	0.0	% of mass
Noack evaporation loss	NF T 60 101 CEC L-40 A-93  ASTM D5800	0.35	% of mass
Elastomer swelling 70h at 212°F	ASTM D 4289.83	<2	Dimensional variation %
Static temperature ranges Continuous Peak	- -	-30  +1100 -30  +1100	°C °C
Rotation factor	n.dm	80,000	mm/min-1
4-ball test                             Wear scar diameter                   Wear load index	ASTM D 2266 / ISO 20 623	0.50 4850	mm daN
TIMKEN Test	ASTM D 2509	45	lbs
EMCOR rust-prevention test    Dynamic Static	NF T 60 135  ISO DP 6294/ ASTM D 1743	0 1	Rating Rating
Resistance to water washout at 80°C	ASTM 1264	<0.5	% of mass

 

PRESENTATIONS  

Aerosol 650 ml

Tin 1 L

 

 

Looking for another product?

Discover our entire range by clicking on the photo

 

Manufacturing, lubrification, cleansing, protection,
IBiotec^® Tec Industries^® Service
offers a wide range of products reserved for industrial area

 

---

 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

- Please contact us -

 

---

IBiotec^® Tec Industries^®Service
manufacturer of technical chemical products.
Welcome to our website.

---

IBiotec^® Tec Industries^®Service is on :